Waferlock’s Standalone system is an ideal locking solution for small commercial / office premises that require
the convenience of an electronic locking system, easy management of user’s cards / fobs without the need for a
computer or software.
| Waferlock Upgradeable Standalone System |
|---|
The Waferlock Standalone System is an ideal locking solution for small commercial / office premises that require the convenience of an electronic locking system, easy management of user’s cards / fobs without the need for a computer or software.
The system can be easily upgraded to work on our PC based e-Link system if required in the future.
• Simple to program from cards no software / computer require
• Each lock supports up to 1000 users
• Easy to delete issued user cards / fobs via the supplied shadow cards
• All user cards / fobs can be deleted easily in one go if required
• The locks can be easily set in passage mode:
Using a passage mode card you can choose which users have this function in their user card
• Battery life : Standby 3 years or 50,000 operations
• Low battery warning
• Emergency battery packs available
• Battery Locks and Wall Readers can have their firmware upgraded to work with our PC controlled
e-Link system
• Hard wired wall readers are available for high usage doors )
| WEL-7104 Standalone Euro Handle Locks / WCL-7104Standalone Electronic Cylinders |
|---|
Main Features
• Transponder:MIFARE® Classic (13.56Mhz) *
• Opening mode:
1. Standard (default 6 seconds)
2. Passage Mode via Passage Toggle Card
• User cards or fobs can be easily deleted if lost using a shadow card
• Each lock supports up to 1000no users
• Smart sleep mode
• Acoustic Low Power Warning
• Emergency Power Pack available in case of flat batteries
• Transponder reading distance: up to 20mm
• Totally wire free
• Euro Lock can easily to retrofit onto existing mortise lock cases
• Cylinders can easily fit in place of existing mechanical cylinders
• Firmware can be upgraded to change the locks to work on our
e-Link system with no hardware change
Technical Specification – As per our e-link section
*MIFARE and MIFARE Classic are trademarks of NXP B.V

| Standalone Wall Readers – WR-1500 Standard Wall Reader |
|---|
Main Features
• Compact design
• Transponder: MIFARE® Classic (13.56Mhz)
• Reading distance: up to 40mm
• LED indication
• Acoustic indication of card acceptance
• Firmware can be upgraded to change the wall
reader to work on our e-Link system with no
hardware change
Technical Specification – As per our e-link section

| Standalone Wall Readers – WR-1520 IP67 Rated Wall Reader |
|---|
Main Features
• Metal Frame
• Supplied with a separate mounting plate for ease
of install
• Transponder:MIFARE® Classic (13.56Mhz)
• Reading distance: up to 25mm
• LED indication
• Acoustic indication of card acceptance
• Firmware can be upgraded to change the wall
reader to work on our e-Link system with no
hardware change
Technical Specification – As per our e-link section

| Standalone Wall Reader Controller – WR-2104 Wall Reader Controller |
|---|
Main Features
• Max users: 1000
• 2 Reader connection
• Outputs: 2 relay outputs
• Works with either WR-1500 or WR-1520 Wall Reader
• Firmware can be upgraded to change the controller / wall reader to work on our e-Link system with no hardware change

Technical Specifications
| Power | 12Vdc – 24Vdc |
| Current draw | 250mA |
| Number of wall readers | 2 |
| Communication | Link to wall reader by RS 485 cable |
| Number of relays |
2 (Rated at 7A @ 30Vdc) |
| Input | Exit button input |
| Operating temperature | -20°C to 70°C |
| Certification | CE certified |
| Standalone System User/Function Cards |
|---|
Function Cards
WIS-306-MF Programming Card
(1no required per system)
WIS-305-MF Passage Mode Card
(Only 1no per system)
User Cards /Fobs
(Maximum 1000 per system)
WIS-304/7-MF User Card / Shadow Card
WTG-306/WIS-300 User Fob / Shadow Card

| Manufacturer | Waferlock |
|---|