The Ulydor PBX Door Entry System is our market leading Modular Door Phone System. It can be programmed to dial any number or hunt group at the push of a button when connected to either a PBX telephone system or via a GSM gateway and with its 2 built-in relays can be used to remotely open doors, gates, control cameras, lights, etc.
Ulydor can be expanded to include:
Three systems are available in pre-assembled kits:
*The keypad can be used as additional buttons, as well as for door access control
**Requires 12v power supply
***Relays are used to open doors and operate additional devices
The Ulydor PBX door entry system allows you to build a 0-64 button modular door access system.
Ulydor is ideal when used in blocks of apartments or where there are different companies occupying different floors that require their own unique door entry solution or as an answer to single door entry. Ulydor is a reliable and cost effective solution.
The Ulydor control unit is supplied as a module with 0, 1 or 2 buttons. One control unit (UC0, UC1 or UC2) is required for every application. To increase the amount of door entry buttons, a C4 and/or an M4 unit(s) will need to be added.
UC0 – CONTROL MODULE WITH NO BUTTON |
---|
A Ulydor Control (UCx) Module is required for every application. A UCx Module is required in conjunction with a Keypad application.
| ![]() |
---|
UC1 – CONTROL MODULE WITH ONE BUTTON |
---|
A Ulydor Control (UCx) Module is required for every application. A UCx Module is required in conjunction with a Keypad application.
| ![]() |
---|
UC2 – CONTROL MODULE WITH TWO BUTTONS |
---|
A Ulydor Control (UCx) Module is required for every application.
| ![]() |
---|
C4 – 4 BUTTON PRIMARY EXTENSION MODULE |
---|
This module adds 4 buttons when used with a Ulydor Control Module (UCx). The C4 is differentiated from the M4 by a heavily populated green PCB.
| ![]() |
---|
M4 – 4 BUTTON SLAVE EXTENSION MODULE |
---|
An M4 has to follow a C4 module. The M4 is differentiated from the C4 by a less heavily populated brown PCB and has two yellow cables allowing hardwired connection to a C4 module.
| ![]() |
---|
UCK – 12 BUTTON ACCESS CONTROL MODULE |
---|
When used in conjunction with a UC0 module, the maximum configuration is 18 buttons (keypad being the last module to be used).
| ![]() |
---|
RFIDU-R – STANDALONE PROXIMITY DOOR ACCESS MODULE |
---|
Standalone proximity door access module
| ![]() |
---|
USPK – LOUDSPEAKER MODULE |
---|
For use in noisy environments. Increases output by 78db. Has to be used in conjunction with a UCx Module
| ![]() |
---|
BLK – BLANK MODULE |
---|
This module is ideal where a Company will perhaps need to expand their requirement in the future. By initially investing in a much larger Surface Mount Box than required and using the blank modules to seal off areas of the box that are not in use at that time but may be taken out and replaced with the appropriate module later.
| ![]() |
---|
NNM – NAME/NUMBER MODULE |
---|
| ![]() |
---|
IPC – IP COLOUR CAMERA MODULE |
---|
Allows the visitor at the door to be viewed on your PC screen, PDA or mobile phone The IP Camera is quick and straightforward to install via your structured cable network by adopting the RJ45-RJ45 lead (red lead on the Rear View photograph) between camera and the wall socket. Program the camera via the web, logging its IP address and serial number. Once accepted, file the information under “favourites” on your web browser (or create a shortcut on your desktop). When receiving a call from the Ulydor (UCx) reception unit, simply go into “favourites” (or the shortcut) and by depressing the appropriate flag your computer screen will ‘pop’ displaying the image of the visitor and a conversation can take place.
| ![]() |
---|
WFC – WiFi COLOUR CAMERA MODULE |
---|
Allows the visitor at the door to be viewed on your PC screen, PDA or mobile phone.
| ![]() |
---|
SMB1 – SURFACE MOUNT BOX WITH BUILT IN HOOD FOR 1 MODULE |
---|
Surface Mounted Box housing 1 module
| ![]() |
---|
SMB2 – SURFACE MOUNT BOX WITH BUILT IN HOOD FOR 2 MODULES |
---|
Surface Mounted Box housing 2 modules vertically
| ![]() |
---|
SMB3 – SURFACE MOUNT BOX WITH BUILT IN HOOD FOR 3 MODULES |
---|
Surface Mounted Box housing 3 modules vertically
| ![]() |
---|
FMBB1 – FLUSH MOUNT BACK BOX FOR 1 MODULE |
---|
The FMBB1 is a back box that is fixed into the wall and should always be used in conjunction with the EWH1 when being installed outside.
| ![]() |
---|
FMBB2 – FLUSH MOUNT BACK BOX FOR 2 MODULES |
---|
The FMBB2 is a back box that is fixed into the wall and should always be used in conjunction with the EWH2 when being installed outside.
| ![]() |
---|
EWH1 – EXTERIOR WEATHER HOOD FOR 1 MODULE |
---|
The EWH1 should always be used in conjunction with FMBB1 | ![]() |
---|
EWH2 – EXTERIOR WEATHER HOOD FOR 2 MODULES |
---|
The EWH2 should always be used in conjunction with FMBB2 | ![]() |
---|
Manufacturer | Ulydor |
---|