Accreditation logos

HomeAccess Control SystemsWaferlockWaferlock Standalone System
Waferlock Standalone System

Waferlock Standalone System

Category: Waferlock

 

Shadow Card System Brochure

Waferlock Upgradeable Standalone System


Waferlock’s Standalone Shadowcard system is an ideal locking solution for small commercial / office premises that require the convenience of an electronic locking system, easy management of user’s cards / fobs without the need for a computer or software.

The system can be easily upgraded to work on our PC based e-Link system if required in the future.

• Simple to program from cards no software / computer require
• Each lock supports up to 1000 users
• Easy to delete issued user cards / fobs via the supplied shadow cards
• All user cards / fobs can be deleted easily in one go if required
• The locks can be easily set in passage mode:
Using a passage mode card you can choose which users have this function in their user card
• Battery life : Standby 3 years or 50,000 operations
• Low battery warning
• Emergency battery packs available
• Battery Locks and Wall Readers can have their firmware upgraded to work with our PC controlled
e-Link system
• Hard wired wall readers are available for high usage doors )

 

WEL-7104 Standalone Euro Handle Locks / WCL-7104Standalone Electronic Cylinders


Main Features

• Transponder:MIFARE® Classic (13.56Mhz) *

• Opening mode:
1. Standard (default 6 seconds)
2. Passage Mode via Passage Toggle Card
• User cards or fobs can be easily deleted if lost using a shadow card
• Each lock supports up to 1000no users
• Smart sleep mode
• Acoustic Low Power Warning
• Emergency Power Pack available in case of flat batteries
• Transponder reading distance: up to 20mm
• Totally wire free
• Euro Lock can easily to retrofit onto existing mortise lock cases
• Cylinders can easily fit in place of existing mechanical cylinders
• Firmware can be upgraded to change the locks to work on our
e-Link system with no hardware change
Technical Specification – As per our e-link section

 *MIFARE and MIFARE Classic are trademarks of NXP B.V

 

WEL7104_Standalone_Euro_Handle_Locks

 

Standalone Wall Readers - WR-1500 Standard Wall Reader


Main Features

• Compact design
• Transponder: MIFARE® Classic (13.56Mhz)
• Reading distance: up to 40mm

• LED indication
• Acoustic indication of card acceptance
• Firmware can be upgraded to change the wall
reader to work on our e-Link system with no
hardware change

Technical Specification – As per our e-link section

 

WR1500 Wall Reader

 

Standalone Wall Readers - WR-1520 IP67 Rated Wall Reader


Main Features

• Metal Frame
• Supplied with a separate mounting plate for ease
of install
• Transponder:MIFARE® Classic (13.56Mhz)
• Reading distance: up to 25mm

• LED indication
• Acoustic indication of card acceptance
• Firmware can be upgraded to change the wall
reader to work on our e-Link system with no
hardware change

Technical Specification – As per our e-link section

 

WR1520 IP67 Wall Reader

 

Standalone Wall Reader Controller - WR-2104 Wall Reader Controller


Main Features

• Max users: 1000
• 2 Reader connection
• Outputs: 2 relay outputs
• Works with either WR-1500 or WR-1520 Wall Reader
• Firmware can be upgraded to change the controller / wall reader to work on our e-Link system with no hardware change

WR2500 Controller

Technical Specifications

Power 12Vdc - 24Vdc
Current draw 250mA
Number of wall readers 2
Communication Link to wall reader by RS 485 cable
Number of relays
2 (Rated at 7A @ 30Vdc)
Input Exit button input
Operating temperature -20°C to 70°C
Certification CE certified

 

Standalone System User/Function Cards


Function Cards

WIS-306-MF Programming Card
(1no required per system)

WIS-305-MF Passage Mode Card
(Only 1no per system)

User Cards /Fobs

(Maximum 1000 per system)
WIS-304/7-MF User Card / Shadow Card

WTG-306/WIS-300 User Fob / Shadow Card

Programming and shadow card
VTEM FlyBox
Go to top