Accreditation logos

A1 Series Accessories

A1 Series Accessories

 

PS24D52 - 24VDC Stablised Power Supply

(This power supply only must be used to power the A1 locks)

  • CE certified use with the A1 locks
  • Can supply power for 2 locks at a time
  • Back-up battery connection available (requires 3no 12vdc batteries)
  • Short-circuit protection
  • Overheating protection
  • Distance trimmer for adjustment according to the distance between power supply and lock

 

Power Supply Datasheet

 

 

A1 - BASIC CABLE

It is important that the right amount of current arrives at the lock. In order to always guarantee this (in holding current position, but especially at the time when activation current is drawn), we recommend the use of 1.5mm2 cable section for the power cables and 0.22mm2 cable section for the signalisation cables. We have made the A1 - BASIC CABLE especially for this purpose.

 

Cable Datasheet

 

 

A1 - REL-1

In order to make it easy for the installer and the end-user to use the A1-BASIC locks to their full potential, we can supply the REL-1. This is a small printed circuit board, which can easily be connected to the A1 - BASIC lock giving you a volts free output from the bolt and door signal monitoring.

 

 

SE-17 Security Escutcheon

 

SE-17 Datasheet

 

 

SMB (Surface Mount Brackets)

The surface mount bracket consists of 2 fixation blocks and 1 stainless steel cover. Installation needs to be done on the secure side of the door and can be vertical as well as horizontal.

SMB Datasheet

 

SMB-SN for the A1 Sanocyl lock.
(Also used for surface mounting of the A1 basic/A1 sanocyl strike-plate.
SMB-L (Left Hand) for the A1 basic lock
(30mm Backset only).
SMB-R (Right Hand) for the A1 basic lock
(30mm Backset only).

 

Go to top